C R Clarke Model 25 Injection Moulder
£2,664.00
£2,220.00
The Clarkes Model 25 injection moulder provides a clear demonstration of the principles of injection moulding.
Pack Size:
1
Estimated delivery time - 20 working days
Requires Installation
This machine features a temperature controlled heating barrel, rack and pinion injection ram, over centre mould closing, automatic moulding ejection and is supplied with a wheel mould (flat upper & shaped lower mould) and 2kgs of red polystyrene granules.
To operate the machine, plastic granules are loaded into the heating barrel. After a short pre-heat time, the plastic is ready to inject. The mould is closed and the injection ram lowered. This action automatically opens a valve in the injection nozzle and the plastic is injected.
Once the mould is full the ram is retracted. The heating barrel rises on its return springs, closing the valve. After cooling the mould is opened and the moulding is ejected by pins in the mould cavity.
Requires permanent fixing or bolting down. Safe and easy to use.
To operate the machine, plastic granules are loaded into the heating barrel. After a short pre-heat time, the plastic is ready to inject. The mould is closed and the injection ram lowered. This action automatically opens a valve in the injection nozzle and the plastic is injected.
Once the mould is full the ram is retracted. The heating barrel rises on its return springs, closing the valve. After cooling the mould is opened and the moulding is ejected by pins in the mould cavity.
Requires permanent fixing or bolting down. Safe and easy to use.
Gross Weight | 35 |
---|---|
Brand | CR Clarke |
Pack Size | 1 |
Type | Injection Moulder |
Voltage | 230V |
Warranty | 12months |
Dimensions | 800 x 410 x 500 mm |
Write Your Own Review