ENA110 Enamel Kiln
£557.16
£464.30
Enamelling kiln idea for jewellery work.
Pack Size:
1
Estimated delivery time - 42 working days
Can be used without the need for either an energy or temperature regulator.
If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature.
Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator.
The 910-278 Kiln Temperature Programmer & Thermocouple does not require this.
Max temp of 1000°C
External dimensions HxWxD: 250 x 200 x 210mm.
Internal dimensions HxWxD: 130 x 120 x 70mm.
0.9KW
Weight: 4.5kg
Supplied with a batt (ceramic shelf)
If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature.
Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator.
The 910-278 Kiln Temperature Programmer & Thermocouple does not require this.
Max temp of 1000°C
External dimensions HxWxD: 250 x 200 x 210mm.
Internal dimensions HxWxD: 130 x 120 x 70mm.
0.9KW
Weight: 4.5kg
Supplied with a batt (ceramic shelf)
| Gross Weight | 6.4 |
|---|---|
| Pack Size | 1 |
| Dimensions | 250 x 200 x 210 mm |
Write Your Own Review