ENA150 Enamel Kiln
£890.04
£741.70
Enamelling kiln idea for jewellery work.
Pack Size:
1
Estimated delivery time - 42 working days
Can be used without the need for either an energy or temperature regulator.
If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven
by using the controller to set the kiln to operate at a set/consistent temperature.
Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted
to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1100°C
External dimensions HxWxD: 380 x 260 x 300mm
Internal dimensions HxWxD: 200 x 160 x 90mm
1.2kW
Weight: 8kg
Supplied with a batt (ceramic shelf)
We strongly recommend the enamelling kilns are used with a controller/programmer to prevent over-firing.
If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven
by using the controller to set the kiln to operate at a set/consistent temperature.
Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted
to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1100°C
External dimensions HxWxD: 380 x 260 x 300mm
Internal dimensions HxWxD: 200 x 160 x 90mm
1.2kW
Weight: 8kg
Supplied with a batt (ceramic shelf)
We strongly recommend the enamelling kilns are used with a controller/programmer to prevent over-firing.
| Gross Weight | 13 |
|---|---|
| Pack Size | 1 |
| Dimensions | 380 x 260 x 300 mm |
Write Your Own Review