Lo-Volt Power Supply
£171.24
£142.70
This unit provides voltages of 2, 4, 6, 9, 12 or 14 V AC or full-wave rectified DC at 4 A continuously, or up to 5 A for periods of 1 hour.
Pack Size:
1
In stock
This unit provides voltages of 2, 4, 6, 9, 12 or 14 V AC or full-wave rectified DC at 4 A continuously, or up to 5 A for periods of 1 hour. Voltages are selected by means of a rotating switch on the front panel. In any incidence of overload, including direct short, a current sensing circuit breaker mounted on the front panel will operate and disconnect the output voltage. Outputs are taken from colour coded 4 mm sockets mounted on the front panel. An illuminated on/off switch is mounted on the rear panel adjacent to a fused appliance inlet. Housed in a robust metal case with a durable powder coated finish. Supplied with mains lead and instructions.
• AC Output Voltage Range: 2, 4, 6, 9, 12 and 14 V AC
• Maximum AC Output Current: 4 A (5 A up to 1 hour)
• DC Output Voltage Range: 2, 4, 6, 9, 12 and 14 V DC
• Maximum DC Output Current: 4 A (5 A up to 1 hour)
• AC Output Voltage Range: 2, 4, 6, 9, 12 and 14 V AC
• Maximum AC Output Current: 4 A (5 A up to 1 hour)
• DC Output Voltage Range: 2, 4, 6, 9, 12 and 14 V DC
• Maximum DC Output Current: 4 A (5 A up to 1 hour)
| Brand | IPC |
|---|---|
| Casing | Metal, no handle |
| Current (max) | 5 A |
| Lockable/ Voltage Limiter | No |
| Output | AC & DC |
| Output Type | Non -smoothed, non-regulated |
| Safety Overload Protection | Yes |
| Voltage Display | No |
| Voltage Range | 2 - 14 V AC or DC |
| Voltage Selector Type | Stepped |
| Pack Size | 1 |
| Gross Weight | 2.68 |
| Dimensions | 179 x 190 x 85 mm (L x W x H) |
Write Your Own Review